Installation

18
IMPORTANT!

The water connection instructions below are intended only for the professional installer.

The refrigerator includes a braided water line hose compatible with a brass adaptor.

Ensure the refrigerator is NOT plugged into a power supply.

Ensure there is enough tubing for the water connection and to pull the refrigerator outforservice, if required.
!4 CONNECT TO WATER AND ELECTRICAL SUPPLY
1
Flush water through the hose prior to connection to the
refrigerator to remove any debris in the hose.
2
Move the refrigerator in front of the cabinetry close enough
to allow access behind for power and water connections.
3
At the front of the refrigerator,
connect an adaptor to one end
ofthe braided water line hose.
Note: The adaptor is not required
for installation, if 1/4”plastic
tubing is used.
4
Insert the tube end of the adaptor fully
into the PRV. Once inserted, pull gently
on tubing to ensure it is locked in (A).
Note: Dislodge the PRV from the clips,
ifrequired.
5
Secure the connection by attaching
thelocking key in between the PRV
andtube end of theadaptor (B).
Note: If the PRV is dislodged for
installation (
3
), mount the PRV
backintothe clip.
B
A
PRV