Installation Guide

25
C
E
A
Attach the door panels
1
Open the door and loosen the M5x10 cross-head screws
(do not remove) at the sides of the doors (A).
2
Hang the door panel by inserting the M8 studs
through the holes of the hanging bracket (B).
3
Slide the forks of the side brackets onto
the screws of the door (C).
4
Screw the M8 washer and nut to each stud
(D) using the hex key, and re-tighten the
sidescrews (E) to fix the door panel
(do not fully tighten). This will allow
openingthe door without affecting
adjustment of the doorpanel.
B
Tools
FPA spanner
Hex key
Cross-head screwdriver
Powered driver (optional)
!9DOOR PANEL INSTALLATION—STAINLESS STEEL