Installation Guide
Table Of Contents
- Contents
- Introduction
- Safety and warnings
- Installation instructions
- Operating instructions – Internal control panel
- Operating instructions – Special functions
- Interior and exterior features
- Storing your wine
- Loading your wine bottles
- Cleaning care – Exterior
- Cleaning care – Interior
- User warnings and sounds
- Troubleshooting
- Manufacturer’s Warranty
- Customer Care
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
14
OPERATING INSTRUCTIONS – INTERNAL CONTROL PANEL
The control panel enables you to view and modify all the features and options on your
Wine Cabinet.
Temperature control
●
When the Wine Cabinet is turned on for the first time, the control panel will display the
actual temperature of the cabinet.
●
The system will automatically cool both zones to their default temperature setting of
12°C (ideal for long term storage). This will take between 1 – 2 hours.
●
The temperature zones are independently controlled and do not change with the
temperature or humidity of the surrounding; whether summer or winter.
●
The Wine Cabinet can be set to any temperature between 5°C and 20°C in each zone to
accommodate your wine storage requirements.
●
If you wish to alter the temperature of either zone, this can be easily done by using the
internal control panel.
Internal control panel
Adjusting the temperature of each zone
1
Press and hold the ‘Temp Zone’ button for 3seconds. The zone temperature blinking
on the display will indicate whether the upper or bottom zone is selected.
2
To change zones press the ‘Temp Zone’ button once.
3
The temperature may be altered by pressing the or buttons. One press on either
of these buttons will increase or reduce the temperature by one °C or °F.
When the desired temperature is displayed, wait 5 seconds, the blinking will stop and
the temperature will be set.
4
To switch between temperature units of °C and °F, press and hold the ‘Light’ icon for
3seconds.