Installation Guide
Table Of Contents
- Contents
- Introduction
- Safety and warnings
- Installation instructions
- Operating instructions – Internal control panel
- Operating instructions – Special functions
- Interior and exterior features
- Storing your wine
- Loading your wine bottles
- Cleaning care – Exterior
- Cleaning care – Interior
- User warnings and sounds
- Troubleshooting
- Manufacturer’s Warranty
- Customer Care
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
18
LOADING YOUR WINE BOTTLES
When loading your Wine Cabinet please keep in mind our loading capacities are based
on standard 750ml Bordeaux bottles.
DOs DON’Ts
●
Before loading wine into the cabinet
confirm that all shelves are secured
andstable.
●
Roller shelves are designed for holding
6wine bottles only.
●
Fixed shelves are designed for holding
only two tiers of wine bottles.
●
When storing a combination of red and
white wines, we recommend storing
same case wines together. For example
red wine in the bottom zone and white
wine in the upper zone.
●
Do not load more than the
recommended number of wine bottles
on roller shelves and fixed shelves.
●
Do not remove any roller shelves to
allow the shelf below to hold more
than the recommended number of
wine bottles.
Upper zone roller shelf
This shelf is designed to hold
6wine bottles only.
Upper zone fixed shelf
This shelf is designed to hold
9wine bottles only.
Bottom zone fixed shelf
This shelf is designed to hold
11wine bottles only.
Bottom zone roller shelf
This shelf is designed to hold
6wine bottles only.