Installation Guide
Table Of Contents
- Contents
- Introduction
- Safety and warnings
- Installation instructions
- Operating instructions – Internal control panel
- Operating instructions – Special functions
- Interior and exterior features
- Storing your wine
- Loading your wine bottles
- Cleaning care – Exterior
- Cleaning care – Interior
- User warnings and sounds
- Troubleshooting
- Manufacturer’s Warranty
- Customer Care
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
9
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
Please follow the installation steps below to ensure your appliance operates correctly.
Power
●
The appliance must be installed so the plug is accessible.
●
To ensure that the appliance is not accidentally switched off, connect your Wine Cabinet
to its own power point. Do not plug in any other appliance at this power point.
●
For power requirements, please refer to the serial plate located on the rear of the
cabinet.
●
It is essential that the appliance is properly grounded (earthed).
●
Connect the appliance to the electrical supply (220V–240V50Hz) with the fitted
plug and lead.
●
Connections to the mains supply should be in accordance with local regulations.
Location
●
Your Wine Cabinet should not be located in direct sunlight or next to any heat
generating appliance such as a cooktop, oven or dishwasher.
●
The appliance should not be located in garages or on carpeted floors.
●
This refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 38 °C.
●
For optimum performance, it is recommended to control the ambient temperature
betwen 16°C and 25°C.
Ventilation and installation
To ensure adequate ventilation for your Wine Cabinet, see ‘Product and cabinetry
dimensions’.