Installation Guide

19
CLEANING CARE – INTERIOR
Interior

For ease of cleaning, empty the Wine Cabinet first and remove all shelves.

Wipe interior surfaces using only liquid dishwashing detergent dissolved in warm water
and a soft lint-free cloth. Rinse with clean water and dry with a clean, lint-free cloth.

Do not use harsh chemicals, abrasives, ammonia, chlorine, bleach, concentrated
detergents, solvents or abrasive scouring pads on any part of your Wine Cabinet.
SOME of these chemicals may dissolve, damage and/or discolour the interior of your
Wine Cabinet.
Roller shelves

When cleaning use a dry clean, lint-free cloth to wipe over surfaces. Do not use warm
water or any cleaners as this will damage the shelves’ oak characteristics and cause
them to warp and stain.

If the shelves are lightly stained by spilt wine or water allow the surface to dry, then
using 200grade sandpaper gently sand over the stain until removed.

If shelves are heavily stained, over time the colour of the shelf will darken and warp,
and may eventually require replacing. Replacement shelves are available from your
Fisher&Paykel trained and supported service technician.
Remove roller shelves
1
Pull the shelf towards you extending
the telescopic runners, making sure
the shelf is empty (refer to A).
2
Hold the front and back edge of the
shelf firmly and lift vertically to unclip
from securing hooks (refer to B).
3
Pull the shelf towards you to remove.
4
Push both telescopic runners back
into the WineCabinet.
Repositioning roller shelves
1
Push both telescopic runners back into the WineCabinet.
2
Align the shelf on top of the securing hooks and push the shelf down until you feel itclip.
3
Ensure the shelf is securely clipped onto the telescopic runners before use.
IMPORTANT!
Telescopic runners are pre-lubricated, and will not need to be re-lubricated during
their life. Do not attempt to clean the grease from the runners, as this will affect their
ability to function. Do not immerse the runners in water.
A
B