Installation Guide

31
1 Before rolling the second appliance, insert a barbed plug into a large
hole on the cabinetry side of the appliance to protect the inside
of the cabinetry from being damaged by screws on the side of the
appliance(B).
2 Roll the second appliance into the cabinetry side by side with the first
appliance (A).
3 Continue rolling the appliance into the cabinetry until the anti-tip
bracket overlaps (min 180mm) the back top surface of the appliance.
Referto‘Cavity Preparation’.
4 Check the clearance between the floor and the feet. Ensure the rollers
ofthe appliance can roll freely on the floor.
Positioning and aligning the second appliance inside the cabinetry
5 Align the top cap of the second appliance flush with the central spacer
and top cap of first appliance (C).
C
6 Mark the step (D) of each alignment gauge based on the thickness of
the door panel to be installed to the door.
7 Align the marked steps of the gauges flush with the edges of the
cabinetry side walls.
– Place a ruler on the steps of the alignment gauges to check if they
are in line (E) relative to the thickness of the door panel.
8 Check if the gaps between appliance and cabinetry side wall are even.
E
D
A
B
Install fasteners kit
Barbed plug
(2)
Tools
Ruler
!8 DUAL INSTALLATION