Installation Guide

32
Rear footFront foot
Adjusting height of the second appliance inside the cabinetry
1 Turn the front and rear adjustment screws using a cross-head screwdriver
(or powered driver) to extend the feet until it engages the floor.
– One turn of height adjusting nuts is equivalent to 0.5mm of height
adjustment. Clockwise turn raises the height and counter-clockwise
turn lowers height (A).
2 Continue turning the adjusting screws alternately between front and rear
feet until you achieve the correct alignment of the second appliance with
the first appliance.
3 Once you are satisfied with the alignment, raise the height of the appliance
by alternately adjusting the front and rear feet until the top surface contacts
the alcove ceiling.
– Check the alignment gauges while adjusting the screws to make sure
you maintain the alignment of both appliances.
4 Ensure all feet are positively engaged with the floor.
IMPORTANT!
●●
Ensure the door is in line with the cabinetry front and the appliance is centred.
●●
All four corners of the appliance must be supported firmly onto the floor to eliminate any movement.
●●
Installing the appliance on a soft, uneven, or not level floor may cause twisting and poor door sealing.
A
Front foot
adjustment
Rear foot
adjustment
Tools
Cross-head screwdriver
Powered driver (optional)
!8 DUAL INSTALLATION