Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components
- 4 tools
- 5 dual install options
- 6 appliance dimensions and specifications
- 7 Cabinetry options
- 8 Cavity dimensions
- 9 Door and toe kick panel dimensions
- !0 Custom door panel dimensions
- !1 Door clearance
- !2 Electrical and plumbing dimensions
- !3-A Electrical and plumbing specifications (FOR NZ & AU only)
- !3-b Electrical and plumbing specifications (for GB & EU only)
- !4 Before installation
- !5 cavity preparation
- !6-A water and power supply connection (For NZ & AU only)
- !6-b water and power supply connection (For GB & EU only)
- !7 Single installation
- !8 Dual installation
- !9 water filter InstallATION
- @0 door panel installation (Stainless steel)
- @1 door panel installation (Custom)
- @2 toe kick installation
- @3 cabinet trims Installation
- @4 door trims installation
- @5 Optional — Changing over door hinges
- @6 Final checklist
34
Water filter
install kit
Water filter
(1)
Tools
Filter cartridge tool
(1)
Install the water filter
1 Remove the water filter packaging.
2 Pull the filter tool gently to dislodge from the front of the appliance (A).
3 Insert the water filter all the way into the filter casing and press firmly
until the filter head is pushed further inside the casing (B).
4 Using the filter tool, rotate the filter head 90° to lock in place (C).
5 Return the filter tool to its storage position (D).
6 Turn on the water supply to check for leaks.
A
B
C
D
IMPORTANT!
●●
The water filter head must be firmly pushed into the appliance and secured. incorrect installation can lead to water leaks.
Flushing the water filter
●●
Before turning on your automatic ice maker, the water filter must
be flushed to remove any impurities or trapped air in the water
tank and filter system.
●●
Refer to the user guide ‘Operating steps— Automatic ice maker
(freezer only)’.
!9 WATER FILTER INSTALLATION