Installation Guide

35
IMPORTANT!
●●
Ensure to protect the finish of the Fisher & Paykel Stainless Steel door panels.
●●
Leave the protective film on the panels when hanging and remove the film only when the installation is complete.
E
D
F
B
2 Remove the hanging bracket
from the top of the door
and set aside (B).
3 Unscrew the adjustment
screws by 3mm to move
close to the middle of
adjustment range (C).
Remove hanging bracket
1 Remove the M8 washer and M8 nut from
the M8 screws at the top the door (A)
using the supplied hex key and spanner.
Attach the door handle
4 Remove the plastic plugs from handle
holes(x4).
5 Align the handle to the holes and secure
withM5x25 hex screws (D).
Attach the hanging and side brackets
6 Align the screw holes of the hanging bracket
with the screw holes of the door panel, and
fix with 8Gx16 mush washer screws (E).
– 6x screws for 457mm
– 10x screws for 610mm and 762mm
7 Align the side panel bracket assembly
(bracket, slider and spacer) to the screw
holes on the side of the door panel and fix
with 8Gx16 mush washer screws (F).
D
Door handle kit
M5 x 25 Pan Head Socket Screw OR M5x25 hex screw
M5 x 25 Pan Head Socket Screw OR M5x25 hex screw
M5x25 Hex screw
(4x)
Door panel
attachment kit
Side bracket
(6)
Bracket slider
(6)
Bracket spacer
(6)
M5 x 14 Mush Head SS Philips Screw
M5 x 14 Mush Head SS Philips Screw
8Gx16 Mush washer screw
(30)
Tools
Powered driver
(with 2.5mm drill bit)
M4 hex key
(1)
13mm spanner (1)
A
3mm
C
@0 DOOR PANEL INSTALLATION (STAINLESS STEEL)