Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components
- 4 tools
- 5 dual install options
- 6 appliance dimensions and specifications
- 7 Cabinetry options
- 8 Cavity dimensions
- 9 Door and toe kick panel dimensions
- !0 Custom door panel dimensions
- !1 Door clearance
- !2 Electrical and plumbing dimensions
- !3-A Electrical and plumbing specifications (FOR NZ & AU only)
- !3-b Electrical and plumbing specifications (for GB & EU only)
- !4 Before installation
- !5 cavity preparation
- !6-A water and power supply connection (For NZ & AU only)
- !6-b water and power supply connection (For GB & EU only)
- !7 Single installation
- !8 Dual installation
- !9 water filter InstallATION
- @0 door panel installation (Stainless steel)
- @1 door panel installation (Custom)
- @2 toe kick installation
- @3 cabinet trims Installation
- @4 door trims installation
- @5 Optional — Changing over door hinges
- @6 Final checklist
40
Toe kick and toe kick grille
complete installation
Adjusting the toe kick grille
1 Loosen the cap screws of the adjustment brackets from both
sides of the plinth using a hex key (A).
2 Adjust the toe kick to the desired depth by moving it forward/
backward (B).
3 Re-tighten the cap screws of the adjustment brackets on both
sides using the hex key.
5 Reinstall the bottom (movable) grille (E) to the mounting plate.
BA
●●
For toe kick heights 114 – 127mm,
shorten the bottom grille by
cutting along the vertical ribs (F).
Attach the top and bottom grilles
4 Reinstall the top (fixed) grille (C) using the same screws set aside
previously, and reattach the cover (D) to the bottom hinge pocket.
C
D
E
Toe kick grilles
Top (fixed) grille
(1x)
Bottom (movable) grille
(1x)
Tools
Cross-head screwdriver
Cutter
F
@2 TOE KICK INSTALLATION