Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components
- 4 tools
- 5 dual install options
- 6 appliance dimensions and specifications
- 7 Cabinetry options
- 8 Cavity dimensions
- 9 Door and toe kick panel dimensions
- !0 Custom door panel dimensions
- !1 Door clearance
- !2 Electrical and plumbing dimensions
- !3-A Electrical and plumbing specifications (FOR NZ & AU only)
- !3-b Electrical and plumbing specifications (for GB & EU only)
- !4 Before installation
- !5 cavity preparation
- !6-A water and power supply connection (For NZ & AU only)
- !6-b water and power supply connection (For GB & EU only)
- !7 Single installation
- !8 Dual installation
- !9 water filter InstallATION
- @0 door panel installation (Stainless steel)
- @1 door panel installation (Custom)
- @2 toe kick installation
- @3 cabinet trims Installation
- @4 door trims installation
- @5 Optional — Changing over door hinges
- @6 Final checklist
41
Install the side trims
Note: Four (4) dual-lock strips are
pre-installed along each side trim.
1 Peel off the liners from the
dual-lock strips (A).
A
3 Slide the trim behind the lower hinge (C),
then the top hinge (D). Hold the same angle
when sliding the trim.
Slide trim in behind lower hinge, then top hinge
Reveal dual-lock adhesive
Slot trim in behind hinge pocket, then press adhesive to cavity
ensuring trim is also tight against fridge inner face.
D
C
2 Position the trim on the
throat with anangle (B).
B B
4 Slot trim in behind top hinge pocket
(E), then press (F) adhesive to cavity
ensuring trim is also tight against appliance
innerface.
Install parts
Cabinet side trim
assembly (2)
Dual-lock strip
(4)
Tools
Cross-head screwdriver
Cutter
Note:
●●
Press firmly on the dual-lock strip locations
toensure the side trims are securely attached.
●●
For dual installation, do the same steps for
each appliance.
F
E
door hinge
trim
trim
@3 CABINET TRIMS INSTALLATION