Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components
- 4 tools
- 5 dual install options
- 6 appliance dimensions and specifications
- 7 Cabinetry options
- 8 Cavity dimensions
- 9 Door and toe kick panel dimensions
- !0 Custom door panel dimensions
- !1 Door clearance
- !2 Electrical and plumbing dimensions
- !3-A Electrical and plumbing specifications (FOR NZ & AU only)
- !3-b Electrical and plumbing specifications (for GB & EU only)
- !4 Before installation
- !5 cavity preparation
- !6-A water and power supply connection (For NZ & AU only)
- !6-b water and power supply connection (For GB & EU only)
- !7 Single installation
- !8 Dual installation
- !9 water filter InstallATION
- @0 door panel installation (Stainless steel)
- @1 door panel installation (Custom)
- @2 toe kick installation
- @3 cabinet trims Installation
- @4 door trims installation
- @5 Optional — Changing over door hinges
- @6 Final checklist
44
Removing the door
1 Release the hinge spring by turning the star T20 screws in the hinge
to the 0 position (A).
You have the option to change the door hinge side of your appliance from right hand hinge to left hand hinge or vice versa.
A hinge change kit is required for this installation.
IMPORTANT!
●●
Ensure that you remove all the shelves, covers and trims from the appliance before changing the hinges. Take care not to damage the door.
●●
We recommend to lay the appliance (door closed) onto its back on the pallet when removing the door hinges.
3 Detach the door from the appliance by unscrewing the door hinge
M6x10 hex screws at the top (B) and bottom (C) hinges.
2 Close the door and lay the appliance on its back on the pallet.
Top hinge
B
Bottom hinge
C
A
Tools
T2 star-head screwdriver
Flat-head screwdriver
Hex key
@5 OPTIONAL — CHANGING OVER DOOR HINGES