Installation Guide

47
Top hinge installation
1 Reinstall the hinge top bracket and bracket
spacer with M5x12 countersunk screws (A)
onthe new hinge side at the other side of
theappliance.
2 Install the new hinge pocket and alcove top
bracket on the new hinge side using two (2x)
M5x12 pan head screws (B).
Note: The new hinge pocket and alcove top
bracket are supplied with the hinge kit.
3 Install the new hinge in the new hinge pocket
by screwing M5x12 pan head screws (2x) (C).
(Notapplicable to RS46).
4 Open the hinge and reinstall the top hinge
pocket cover (D) to the top hinge pocket.
5 Install a new alcove top bracket on the new
non-hinge side. (Not applicable to RS46) (E).
Bottom hinge installation
6 Install a new lower hinge bracket on the new
hinge side with M6x16 screws (2x) (F).
– Ensure that the tab on the top of the
bracket inserts into the slot in the plinth
front bracket.
7 Use the hinge that was removed from the top of
the appliance and insert the tabs into the hinge
lower bracket. Rotate the hinge into place and
fix with M5x12 countersunk screws (2x) (G).
8 Open the hinge (H), and install the new top
(fixed) grille assembly.
9 Fasten in place with #8x16 screws (3x) (I).
Oneeach at the bottom left and right of the
grille and one behind the water filter hatch.
!0
Reinstall the bottom hinge pocket cover to
thenew hinge pocket (J).
H
A
C
B
E
I
E
I
J
F
I
G
D
Hinge change
assembly
Hinge (right or left) top
pocket (1)
Lower (right or left) hinge
bracket (1)
K05 top (right or left)
adapter bracket (1)
Top (fixed) grille
assembly
Top (fixed) grille
(1)
@5 OPTIONAL — CHANGING OVER DOOR HINGES