Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components
- 4 tools
- 5 dual install options
- 6 appliance dimensions and specifications
- 7 Cabinetry options
- 8 Cavity dimensions
- 9 Door and toe kick panel dimensions
- !0 Custom door panel dimensions
- !1 Door clearance
- !2 Electrical and plumbing dimensions
- !3-A Electrical and plumbing specifications (FOR NZ & AU only)
- !3-b Electrical and plumbing specifications (for GB & EU only)
- !4 Before installation
- !5 cavity preparation
- !6-A water and power supply connection (For NZ & AU only)
- !6-b water and power supply connection (For GB & EU only)
- !7 Single installation
- !8 Dual installation
- !9 water filter InstallATION
- @0 door panel installation (Stainless steel)
- @1 door panel installation (Custom)
- @2 toe kick installation
- @3 cabinet trims Installation
- @4 door trims installation
- @5 Optional — Changing over door hinges
- @6 Final checklist
48
Door brackets
1 Remove the top adapter bracket from the top of the door
byunscrewing M5x10 screws (4x) (A).
2 Install the new top adapter bracket into the other side of
thetop of the door with M5x10 screws (4x) (B).
3 Remove the door panel locking bracket and washer from
thebottom of the door by unscrewing M6x25 screw (1x) (C).
4 Remove the bottom adapter bracket and spacer from the
bottom of the door by unscrewing M6x25 screws (2x)
andM5x30 screw (1x) (D).
5 Install the new bottom adapter bracket and existing spacer
to the other side of the door with M6x25 screws (2x) and
M5x30 screw (1x) (E).
6 Install the existing door panel locking bracket and washer
tothe other side of the door with M6x25 screw (1x) (F).
D
E
F
A
B
C
(use new bottom adaptor
bracket and spacer)
(use new top
adaptor bracket)
(use existing locking bracket)
Hinge change
assembly
K05 top adaptor
bracket R/L (1)
K05 bottom adaptor
bracket R/L (1)
Tools
T2 star-head screwdriver
Flat-head screwdriver
@5 OPTIONAL — CHANGING OVER DOOR HINGES