Installation Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components
- 4 tools
- 5 dual install options
- 6 appliance dimensions and specifications
- 7 Cabinetry options
- 8 Cavity dimensions
- 9 Door and toe kick panel dimensions
- !0 Custom door panel dimensions
- !1 Door clearance
- !2 Electrical and plumbing dimensions
- !3-A Electrical and plumbing specifications (FOR NZ & AU only)
- !3-b Electrical and plumbing specifications (for GB & EU only)
- !4 Before installation
- !5 cavity preparation
- !6-A water and power supply connection (For NZ & AU only)
- !6-b water and power supply connection (For GB & EU only)
- !7 Single installation
- !8 Dual installation
- !9 water filter InstallATION
- @0 door panel installation (Stainless steel)
- @1 door panel installation (Custom)
- @2 toe kick installation
- @3 cabinet trims Installation
- @4 door trims installation
- @5 Optional — Changing over door hinges
- @6 Final checklist
7
The following are options for dual installation with reference to the door opening range and partition (optional) between two appliance combinations.
IMPORTANT!
●●
Beware of clashing (circled) when opening the doors. Use a hinge limiting pin to restrict door opening rotation to 90°. Refer to ‘Door Clearance’ (page 15) for more information.
●●
If installing a partition between two appliances, it must have enough clearance to ensure the doors/handles do not interfere with one another when opening or closing.
NO PARTITION WITH PARTITION
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
min 100mm
min 100mm
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
min 100mm
min 100mm
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
min 60mm
min 60mm
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
min 100mm
min 100mm
5 DUAL INSTALL OPTIONS