Data Sheet Integrated Column Fridge Dual Install (610mm + 762mm)

Model no:
RS6121FLJK1 + RS7621SRK1 shown
(Various models available to swap units to opposite sides, hinge
doors both left, both right or at the outsides as shown here).
IMPORTANT!
For ease of installation, ensure cavity has consistent dimensions top to
bottom and left to right.
Clearance Dimensions mm
A Overall height of cavity
2134
B Overall width of cavity
1372
C Minimum overall depth (shallow) of cavity when services
are located outside of cavity*
Minimum overall depth (deep) of cavity when services
are located at rear of cavity*
635
650
D Width of supply area behind freezer
610
e Width of supply area behind fridge
762
f Height of supply area
229
g Height at sides of supply area
127
h Width from side of supply area
13
i Combined width in from side of supply areas
25
j Depth of supply area
25
Minimum door cabinetry gap clearance
3
Custom Panel Dimensions** mm
k Height of door panel
1978
- 2080
l Width of freezer door panel
605
m Width of fridge door panel
757.5
n Depth of custom door panels
min 16
max 25
o Height of custom toekick panel***
50 - 152
p Width of custom toekick panel***
1368
Maximum weight of freezer door panel (including handle****)
25kg
Maximum weight of fridge door panel (including handle****)
30kg
*Assumes a door panel depth of 19mm.
Connections may be located in an adjacent cabinet to either side of the fridge.
** Custom panels to be manufactured & fitted by cabinetmaker.
*** Optional 100mm tall stainless steel toekick panel available. Alternatively, a custom built
toekick (50mm-152mmH x 1368mmW) may be fitted as shown. Adjust the height of the door
panel accordingly.
**** Door handle kit is available as an optional accessory.
DATA SHEET
610mm Freezer + 762mm Fridge - Custom Panel Integrated Columns
DATE: 10.10.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
ISO VIEW OF 1372mm CAVITY
(610mm + 762mm)
RS6121FLJK1
RS7621SRK1
CUSTOM PANELS
SUPPLY AREA
g
e
hih
f
d
o
p
k
j
l
c
n
m
A
B