Installation Guide

26
CUSTOM DOOR PANEL INSTALL DIMENSIONS
61CM REFRIGERATOR-FREEZER
TOP DOOR PANEL
61CM REFRIGERATOR-FREEZER
DRAWER PANEL
Dimensions apply for the preparation and installation of Custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
z
The thickness of the custom door panel can vary provided that the screws do not penetrate beyond the full depth of the door panel.
90mm 20mm
301.6mm
203.2mm
50.8mm
32.6mm
50mm
127mm
507.8mm
1092mm
50mm
50mm
1254mm
Ø2mm REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
Do not place pilot holes for
handle attachment in marked
areas to avoid clashing with
panel attachment brackets
301.6mm
203.2mm
50.8mm
32.6mm
50mm
38.1mm 88.1mm
508.4mm
558.4mm
771.5mm
Cutouts in the hanging
bracket are applicable for
Fisher and Paykel handles only.
Ø2mm REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
Iflocating a custom handle in
the shaded area shown above,
ensure handle screw headsare
countersunk into the back of the
door panel to avoid interference
with the hanging bracket.
60mm)
For 152mm toe kick, door panel
height should be 51mm shorter
For 51mm toe kick, door panel height
should be 51mm longer