ACTIVESMART™ INTEGRATED SLIDE-IN REFRIGERATOR RS90A & RS90AU models INSTALLATION GUIDE NZ AU GB IE HK SG IN 844219B 08.
CONTENTS FOLLOW THE INSTALLATION SEQUENCE RELEVANT TO YOUR CABINETRY 1 SAFETY AND WARNINGS 2 COMPONENTS LIST 3 PRODUCT AND CAVITY DIMENSIONS 4 DOOR PANEL DIMENSIONS 5 CUSTOM DOOR PANEL INSTALLATION DIMENSIONS 6 DOOR OPENING ROTATION 7 ELECTRICAL AND PLUMBING 8 BEFORE INSTALLATION 9 ATTACH ANTI-TIP BRACKET !0 REMOVE HINGE END CAPS !1 CONNECT TO WATER AND ELECTRICAL SUPPLY !2 ALIGN YOUR PRODUCT INSIDE THE CABINETRY !3 ASSEMBLE THE DOOR PANEL SET !4 HANG THE DOOR PANELS !5 FIX THE BRACKETS AND RE-INSTALL THE
1 ! SAFETY AND WARNINGS WARNING! Electric Shock Hazard Read and follow the safety and warnings outlined in this installation guide before operating this appliance. Failure to do so can result in death, electric shock, fire or injury to persons. IMPORTANT! ●● ●● ●● ●● ! WARNING! Cut Hazard Take care – panel edges are sharp. Failure to use caution could result in injury or cuts.
2 COMPONENTS LIST Product accessories — included with the refrigerator MI (miscellaneous items) pack — included with the refrigerator ACTIVESMART™ INTEGRATED ACTIVESMART™ SLIDE-IN REFRIGERATOR INTEGRATED REFRIGERATOR RS90A, RS9120W, RS90A & RS90AU models RS36A72, RS36A80 & RS36W80 models SERVICE & WARRANTY SERVICE ET GARANTIE ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ SERVIZIO E GARANZIA SERVICE & GARANTIE HUOLTO JA TAKUU USER GUIDE User guide (1x) SERVICE OG GARANTI INSTALLATION GUIDE 保修和维修 NZ AU GB IE HK SG IN 服務
2 COMPONENTS LIST Door panel set Door panel fittings — included with the refrigerator Custom door panel set is only applicable for non-Water dispensing models. Customers can supply their own Custom door panel to match their cabinetry. Fisher & Paykel (Stainless steel) door panel set is not included with the refrigerator and must be purchased separately.
3 F F PRODUCT AND CAVITY DIMENSIONS IMPORTANT! For ease of installation, ensure cavity width is consistent top to bottom and height is consistent left to right.
4 c c h b b A A g DOOR PANEL DIMENSIONS g A g B d e C d E e D A j f f j FRONT VIEW i PROFILE VIEW STAINLESS STEEL/CUSTOM DOOR PANEL DIMENSIONS mm A Height of each top door panel 1096 B Width of each top door panel 446 C Gap between top door panels 4 D Height of bottom drawer panel 598 E Height from bottom of product to top of bottom drawer panel 698 F Width of bottom drawer panel 896 G Gap between top door panels and bottom drawer panel H Depth of each door panel (with
5 CUSTOM DOOR PANEL INSTALLATION DIMENSIONS CUSTOM PANEL PREPARATION The following drawings apply to non-Ice & Water models only. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com CUSTOM PANEL PREPARATION Handle details 392.3mm Top panel – Ensure handle is mounted 65mm from inner edge of panel to the centre – this will avoid interference with brackets. R1.25 REF 12x Pilot holes recommended for bracket attachment.
B 6 D C B C DOOR OPENING ROTATION D A E A B C B C A Wall 115° DOOR OPENING (FULL ROTATION) 115° DOOR 115°OPENING DOOR OPENING [FULL ROTATION] [FULL ROTATION] A Wall 90° DOOR OPENING 90° DOOR 90°OPENING DOOR OPENING RS90A/RS90AU DOOR CLEARANCE DIMENSIONS mm A Depth of door (widest opening) measured from front of door 445 B Depth of drawer (open) measured from front of drawer, including handle 400 C Depth of drawer (open) measured from front of drawer, excluding handle 360 D Minim
7 ELECTRICAL AND PLUMBING WARNING! Electrical shock hazard. Assume all parts are live. Disconnect supply before servicing and installation. Left side of cavity ! Alternative area above cavity for connections 100mm Optional electrical and water connection location* 130mm 100mm Floor 145mm 355mm 72mm REAR VIEW OF CAVITY REAR VIEW OF CAVITY Note: We recommend to use an isolating switch that is easily accessible to the user after the refrigerator is installed.
7 ELECTRICAL AND PLUMBING Maximum distance of hose and power cord Water inlet hose* – 2250mm LEFT HAND SIDE Water inlet hose* – 3180mm Power cord (excl.plug) – 2050mm Power cord (excl.plug) – 800mm RIGHT HAND SIDE Water inlet hose* – 3930mm Power cord (excl.plug) – 2050mm * Applies to Ice & Water models with Fisher & Paykel door panels only.
8 BEFORE INSTALLATION IMPORTANT! ●● ●● ●● ●● ●● ●● Ensure your refrigerator is not exposed to any heat generating appliance eg cooktop, oven or dishwasher. The refrigerator has front and rear rollers for moving the refrigerator forward and backward. Do not move the refrigerator sideways to avoid damaging the rollers or floor covering/surface.
9 ATTACH ANTI-TIP BRACKET IMPORTANT! ●● ●● ●● ●● Ensure the refrigerator door is closed when rolling into cabinetry. DO NOT attempt to open the door until refrigerator is fully installed. The anti-tip bracket and fittings supplied must be fitted to the wall of finished enclosure to withstand 220 lbs (100kg) load. Ensure that anti-tip bracket is installed correctly to prevent the refrigerator tipping forward when door is open.
!0 REMOVE HINGE END CAPS WARNING! ●● ●● Take care when working with the refrigerator outside of the finished enclosure, as the refrigerator is not secured and has the possibility of tipping forward. Tipping of refrigerator can lead to serious injury or death. Left hand hinge Right hand hinge 1 Open the right and left doors carefully. 2 Remove the left hinge end cap (A). ●● Hold onto the corner of the end cap, firmly push to the right to disengage securing hook and pull down.
!1 CONNECT TO WATER AND POWER SUPPLY IMPORTANT! ●● ●● The water connection instructions below are intended only for the professional installer. The standard refrigerator does not include water fittings and can be purchased separately by the customer. ●● ●● ●● Fisher & Paykel water fittings are available (part number: 841301) and comply with local regulations. Ensure water tubing is routed away from any sharp objects, sharp corners, and not in a location where it can be kinked or squashed.
!2 ALIGN YOUR PRODUCT INSIDE THE CABINETRY IMPORTANT! ●● ●● Your product is fitted with front and rear rollers designed for moving the product in the forwards and backwards direction. Avoid moving the product in a sideways direction as this may damage the rollers or the floor covering/surface. IMPORTANT! Ensure water tubing is routed away from any sharp objects, sharp corners (beware of kinking the tube as this will stop water flow), and not in a location where it can be kinked or squashed.
!2 ALIGN YOUR PRODUCT INSIDE THE CABINETRY IMPORTANT! ●● ●● ●● Add ruler to show flushness x 4? It is important that all four corners of the product is supported firmly onto the floor to eliminate any movement. Installing the refrigerator on a soft or uneven/unlevelled floor may result in twisting of the product and poor door sealing. Raise the product using an 11mm hex socket or 4mm hex Allen key. One turn of height adjusting nuts is equivalent to 1mm height travel. Note: Maximum turn — 20mm.
!3 ASSEMBLE THE DOOR AND DRAWER PANELS IMPORTANT! ●● ●● Ensure door panel dimensions are correct for your refrigerator. The assembly of standard Fisher & Paykel kits (Stainless steel door panels) and custom door panels are outlined below. For standard Fisher & Paykel kits, only remove the protective film for handle installation. This will protect the finish of the door panels until installation is complete.
!4 HANG THE DOOR PANELS For non-Ice & Water models only 1 Secure top studs into the refrigerator doors, ensure the open end faces the top. Repeat on all refrigerator doors. 4 Door panels have full axis adjustment to ensure they are flush with adjacent walls, or until satisfactory. To adjust the height of the panels turn clockwise to raise stud or counter-clockwise to lower stud. 2 Secure side screws mid-way into the refrigerator doors x4 for each French door and drawer (2x).
!4 HANG THE DOOR PANELS For Ice & Water models only B 1 Remove the external display module from inside the product. Thread the display harness through the door panel cavity. Ensure the grommet is engaged. 2 Angle top display tabs into the door panel. Ensure the harness is free of pinching. Firmly push against bottom display tabs and insert into the door panel until you feel it clip securely. Ensure the display is flush with the door panel.
!5 FIX THE BRACKETS AND RE-INSTALL THE END HINGE CAPS B A 1 Secure fixing bracket to the ceiling of the enclosure with wood screw (1x) (A). Repeat on the opposite side. D C 2 Left hinge end cap Align hinge cap to the product. Press and firmly slide the cap to the right (B). 4 Right hinge end cap Align hinge cap to product. Press and firmly slide the cap to the left. Ensure cap is flush with the product (D).
!6 INSTALL WATER FILTER AND TOE KICK GRILLE IMPORTANT! ●● The water filter head must be firmly pushed into the product and secured. incorrect installation can lead to water leaks. Installing the water filter Installing the toe kick filter and grille 1 Pull the freezer drawer out slightly and insert the filter into the casing at the bottom left corner of the refrigerator. Ensure the filter handle is positioned vertically (A). 5 Remove filter from inside the product.
!7 ATTACH COVERS AND DOOR/DRAWER TRIMS 1 If applicable, remove any remaining protective film on your door panels. A F E B 2 Open the refrigerator French doors, firmly push top cover (A) 4 Press the dual adhesive tabs together to form pairs (E) and remove Open the refrigerator French doors, firmly push side cover (B) over the side studs. Press firmly to install on the underside of the drawer top trim in the indicated locations (F). over the top studs. the adhesive backing on one side only.
!9 FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER All models Check all parts are installed. Ensure the refrigerator is level. Ensure the refrigerator is securely fastened to the cabinetry with the supplied anti-tip bracket and fittings. Ensure the doors/drawer can open and close freely with no resistance from surrounding cabinetry. Ensure hinge limiting pin is fitted for 90° door swing. Ensure all internal and external packaging is removed from the refrigerator before use.
