Installation Guide

16
!2 ALIGN YOUR PRODUCT INSIDE THE CABINETRY
IMPORTANT!
●
Your product is fitted with front and rear rollers designed for moving the product in the forwards and backwards direction.
●
Avoid moving the product in a sideways direction as this may damage the rollers or the floor covering/surface.
3
Centre the refrigerator within the alcove, using the adjacent walls as a guide.
IMPORTANT!
Ensure water tubing is routed away from any sharp objects, sharp corners
(beware of kinking the tube as this will stop water flow), and not in a
location where it can be kinked or squashed.
1
Gently push the refrigerator into the enclosure.
– Take care not to roll over or damage the power cord and/or water tubing.
2
Ensure a firm contact is observed as the refrigerator engages the anti-tip
bracket (60mm min. overlap).