Installation Guide

19
IMPORTANT!
●
The water connection instructions below are intended only for
theprofessional installer.
●
The appliance comes with a pre-connected plastic water tubing.
●
Water fittings are not supplied and must be purchased separately.
●
Ensure the appliance isconnected to its own isolating switch.
●
Ensure there is enough tubing for the water connection and to pull
theappliance outforservice, if required.
●
Flush water through the hose prior to connection to the appliance
toremoveany debris in the hose.
Water fittings kit
(Ice and Water
modelsonly)
Water tap adaptor
(1)
Collet locking clip
(1)
!3 WATER SUPPLY CONNECTION
3
Secure connection by inserting a locking key (D) between the water tap
adaptor and locking collet.
4
Connect the water tap adaptor to a water tap (E).
– Flush water through the hose prior to connection to the appliance
toremove any debris in the hose.
5
Turn on the water tap and check all connection are dry and free of drips.
B
C
D
2
Insert (B) the free end of the plastic water tubing fully into a water tap
adaptor and pull (C) gently to ensure it is locked in.
Connect to water supply (Ice and Water models only)
1
Move the appliance in front of the cabinetry close enough that you still have
access behind for power and waterconnections (A).
A
E