Installation Guide

23
ACTIVESMART™ OPERATING INSTRUCTIONS
Bottle holder (where fitted)

The bottle holders can be used to store a variety of bottles.

To position the bottle holder in your refrigerator, slot the back edge of the bottle holder
onto the back trim of any shelf in the fresh food compartment.

Unused bottle holders can be stacked up on top of one another so they do not take up
unnecessary shelf space.

Bottles are best stored with the neck of the beverage facing the front of the refrigerator.
Glass shelves

Standard glass shelves can not be repositioned in your refrigerator.
Refer to ‘Cleaning and care — Shelving’ for details on
how to remove the standard glass shelves for cleaning.
Cantilever glass shelves — half-width and full-width

The cantilever glass shelves are designed to be
strongand versatile.

The half-width and full-width shelves are removable
and can be repositioned in your refrigerator.

Place the half-width shelves side-by-side when
youstore large items such as platters.

Place the half-width shelves at different levels to
maximise the storage space when you store items
ofvarying heights.
To remove for repositioning
1
Hold the front and back edge of the shelf firmly A.
2
Push the shelf up vertically to dislodge from
backsupport lugs b.
3
Slide the shelf towards you c.
Drip tray

The drip tray is designed to fit into the bottom of the
water dispenser panel.

To insert the tray ensure the rounded
sides are fitted into the dispenser
panefirst.

The purpose of the tray is to
capture drips of water that may
fallafterdispensing.

The tray can be removed for cleaning.
Drip tray
A
b
c