Operating Manual 230UM-3L-185043325F 1 4/27/07 9:07:43 AM
30UM-3L-185043325F 2 4/27/07 9:07:43 AM
SECTION English .................................................................... A Français ................................................................... B Español ....................................................................
230UM-3L-185043325F 4 4/27/07 9:07:45 AM
English SleepStyle™ 200 Series HUMIDIFIED CPAP SYSTEMS The SleepStyle™ 200 Series are a range of CPAP systems designed for use in the home for the treatment of OSA. For further assistance, please contact your local F&P office – see reverse for addresses. Please keep this manual for future reference. TABLE OF CONTENTS 1. Symbol Definitions ...................................................................................................................................................................
1. SYMBOL DEFINITIONS Type BF Applied Part 2. WARNINGS 1. 2. 3. 4. * 5. * 6. * 7. * 8. 9. ATTENTION Consult accompanying documents Drip Proof Alternating Current PLEASE NOTE:- This manual refers to the SleepStyle™ 200 Series CPAP unit as "the device". The device should only be used with masks, connectors and delivery tubes recommended by Fisher & Paykel Healthcare, or by your physician or respiratory therapist.
5. DESCRIPTION OF THE DEVICE English 5.1 Important Parts of Your Device - Standard Range POWER CORD FILTER HOLDER ON/OFF BUTTON DISPLAY AIR FILTER 900HC010 CONNECTOR SERIAL PORT 900HC221 TUBE 5.2 Important Parts of Your Device - Integrated Range POWER CORD FILTER HOLDER ON/OFF BUTTON 900HC221 TUBE AIR FILTER HEATERPLATE SERIAL PORT DISPLAY 900HC010 CONNECTOR DISPLAY FUNNEL CHAMBER GUARD WATER CHAMBER WATER LEVEL LINE 5.
6. CLEANING & MAINTENANCE 1. Switch off the device and unplug from the power socket. 2. Wipe the exterior of the device with a clean, damp (not wet) cloth and mild dishwashing detergent. Do not use harsh abrasives or solvents, as these may damage the device. 3. DAILY Clean chamber and tube. Remove the breathing tube from the chamber. Rinse the tube with soapy water. Hang up hose with hose ends pointing to floor to dry. Remove the chamber by pushing down the finger guard and pulling out the chamber.
AND DISPLAY - INTEGRATED CPAP RANGE 8.1 DISPLAY DESCRIPTION AND FUNCTIONS On/Off button English 8. CONTROLS Ramp button Up button Increase Setting Down button Decrease Setting Mode button Step through the options KEY FUNCTION & DESCRIPTION ON/OFF Switches the device ON & OFF OPERATION TO SWITCH “ON” Press button briefly The device will default to display the humidity setting. TO SWITCH “OFF” Remove your mask Press button briefly RAMP Reduces pressure to a lower level to help you fall asleep.
8.2 PATIENT MENU SUMMARY - INTEGRATED CPAP RANGE Press once to switch device on/off Press to activate Ramp Increase Decrease Display MODE MODELS HC233 HC234 Humidity Setting (default) < < or MODEL HC238 Total Run Time hr < < Check sum * Altitude Setting Pressure Setting cmH2O RETURN TO DEFAULT 0,1,2,3,4 + - 0.
AND DISPLAY - STANDARD CPAP RANGE 9.1 DISPLAY DESCRIPTION AND FUNCTIONS On/Off button English 9. CONTROLS Ramp button Up button Increase Setting Down button Decrease Setting Mode button Step through the options KEY FUNCTION & DESCRIPTION ON/OFF Switches the device ON & OFF OPERATION TO SWITCH “ON” Press button briefly The device will default to display the humidity setting. TO SWITCH “OFF” Remove your mask Press button briefly RAMP Reduces pressure to a lower level to help you fall asleep.
9.2 PATIENT MENU SUMMARY - STANDARD CPAP RANGE Press once to switch device on/off Press to activate Ramp Increase Decrease Display MODE MODELS HC231 HC232 Model Type (default) Total Run Time hr Average Hours per night * hr/ Check sum * Altitude Setting Pressure Setting cmH2O RETURN TO DEFAULT MODEL HC236 Model Type (default) Total Run Time hr Average Hours per night * hr/ Check sum * Pressure Setting cmH2O RETURN TO DEFAULT * Only available on devices with Compliance Monitoring. 9.
For integrated CPAP devices: a. When I wake up in the morning, my nose and throat feel dry. What can I do? Try increasing your humidity setting. If this does not help, please contact your clinician for advice. b. How do I prevent condensation in the tubing? The humidity setting enables adjustment of humidity, so that there should be fine misting in the six inches (183cm) of the breathing tube closest to your face.
12. OPERATING CONDITIONS: AMBIENT TEMPERATURE: 5 - 35°C HUMIDITY: 10 - 95% RH ALTITUDE: 0 - 3000m (9000ft) Above 1500m (4500 ft) the maximum operating pressure will be reduced. 13. STORAGE AND TRANSPORT CONDITIONS: The device should be stored and transported in environmental conditions of: -10 to 60°C . 14. TROUBLESHOOTING: If you feel that your device is not operating correctly, consult your homecare dealer. Do not attempt to repair the device yourself.
Fisher & Paykel Healthcare Offices: INTERNATIONAL P O Box 14 348, Panmure, Auckland 1741, New Zealand Tel:+64 9 574 0100 Fax:+64 9 574 0158 Email: info@fphcare.com Web Site: www.fphcare.
