Vacuum Seal Drawer, 24"
Table Of Contents
- Contents
- Safety and warnings
- Vacuum seal drawer models
- Unpack your product
- Electrical specifications
- Parts supplied
- Tools required
- Product dimensions - 24" minimal & contemporary models
- Product dimensions - 30" minimal & contemporary models
- Product dimensions - 30" professional models
- Cabinetry dimensions - 24" minimal & contemporary models
- Cabinetry dimensions - 30" minimal & contemporary models
- Cabinetry dimensions - 30" professional model
- Installation options
- Prior to installation
- Installing the drawer
- Adjusting the depth
- Adjusting the height
- Installer checklist
6
UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS
Remove the Vacuum Seal Drawer and accessories box from the packaging. Recycle the
materials that can be reused. Dispose packaging materials in accordance with local regulations
on waste disposal.
Inspect the Vacuum Seal Drawer for any signs of damage. Do not install the Vacuum Seal
Drawer if it has been damaged. If the product is damaged, contact your local Fisher & Paykel
dealer.
RECYCLE
RESPONSIBLY
All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and
supported service technician.
VB24 VB30
Supply 110 VAC, 60 Hz 110 VAC, 60 Hz
Service 10 amp circuit 10 amp circuit
Maximum Power 520 W 520 W
Power outlet* 3-prong grounding-type 3-prong grounding-type
Power cord (total length) 70 7/8" (1800mm) 70 7/8" (1800mm)
* The power outlet must be earthed and located within 35 7/16” (900mm) of the centre rear of the product.