Top Loader Washing Machine, 10kg
Table Of Contents
- Contents
- Safety and warnings
- Installation instructions
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Eco Active™ wash
- Wash preparation
- Getting started quickly
- Wash options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
12
BEFORE YOUR FIRST WASH
Before you start, mark ( ) accordingly if you have gone through
the checklist below:
1 Has the basepacker been removed?
2 Is the drain hose threaded through the hose guide ‘U bend’ (with no more
than 20mm extended) and hooked into your standpipe or tub, or attached
to a spigot?
3 Is the hot hose connected to the hot valve marked ‘H’?
4 Is the cold hose connected to the cold valve marked ‘C’?
5 Have the taps been turned on?
6 Is the machine correctly levelled, feet are extended and cabinet corners are
clear of the floor?
7 Has the power cord been connected to an appropriate power supply and the
power turned on?
8 Have you performed the installation test cycle? Refer ‘Installation
instructions’ page.
FabricSmart™ capacity
FabricSmart™ offers a very generous 10 kg capacity. The list below outlines what is included
in a 10kg wash load (in accordance with AS / NZS 2040.1:2005).
Note: The above load composition is indicative only. We recommend for everyday use that
you separate out your sheets and towels and wash them separately on the
REGULAR cycle.
WASH LOAD - 10 KG QUANTITY
Sheets (double) 4
Bath towels 8
Tablecloths 3
Shirts 4
T-Shirts 6
Pillowcases 6
Shorts 6
Washcloths 4
Handkerchiefs 2