Top Loader Washing Machine, 10kg
Table Of Contents
- Contents
- Safety and warnings
- Installation instructions
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Eco Active™ wash
- Wash preparation
- Getting started quickly
- Wash options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
35
Controlled Cold
If your incoming cold water temperature is very low and you choose to do a ‘Cold’ wash,
the wash would be less effective. The
CONTROLLED COLD option solves this problem by
adding a small amount of hot water to raise the temperature of the wash to approximately
20°C.
To programme the Controlled Cold temperature option:
2
Select the wash temperature you want to
adjust, eg WARM, by touching the
WASH TEMP button. The digital display
screen shows the current setting.
3
Touch the MORE or LESS button
to increase or decrease to the desired
temperature. Each increment is equal to
approximately 1°C.
1
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Enter the Option Adjustment mode
(refer to the ‘OPTION ADJUSTMENT MODE’
for instructions).
Select the
HEAVY cycle.
CHANGING PRE-SET OPTIONS