Use and Care Guide

34
US
CA
Changing pre-set options
Wash temperature
Controlled Cold
If the temperature of your cold water supply is very low and you choose to do a COLD wash, you
will not get an effective wash. The CONTROLLED COLD option solves this problem by adding a
small amount of hot water to raise the temperature of the wash to approximately 68°F (20°C).
1 Enter Option Adjustment mode (refer to page 32).
2 Select the REGULAR cycle.
3 Select COLD wash temperature by touching the WASH TEMP button (if not already selected).
4 The digital display shows the temperature adjustment possible. The default setting is “tAP”,
which is the same temperature as the incoming water from the cylinder for cold water.

Touch the MORE button so “0” is displayed. Your washer will now adjust the cold temperature
to approximately 68°F (20°C).
Fig.35 Changing the cold wash temperature setting from cold faucet to CONTROLLED COLD
Note: if you always use COLD or CONTROLLED COLD water, we recommend that a WARM or HOT
wash be used regularly, eg every 5th wash should be at least a warm one. Warm water is needed
to help maintain the cleanliness of your machine.