Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Installation instructions
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Eco Active™ wash
- Wash preparation
- Getting started quickly
- Wash options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
14
CONTROL PANEL
1 POWER Press to turn the washer ON/OFF.
2 Keylock Touch for two seconds to disable all buttons on the display panel,
except
POWER button. This prevents accidental button presses.
3 Wash cycles Select your desired wash cycle by turning the SmartTouch™
Control Dial. The wash cycle icons will illuminate as you
turn the dial showing which cycle is selected (refer to the
‘Wash cycles’ section).
4 Digital display
screen
Shows the following:
z
‘Time to go’ – the remaining time in the cycle that is
currently running.
z
Delayed start time of wash cycle.
z
Notifications if an error is detected or a warning is necessary.
5 Delay Start It allows you to delay the start of your wash by 5mins up to
18hours (refer to the ‘Wash options’ section)
6 Eco Active Touch to turn Eco Active on or off.
7 Wash Temp Touch to increase or decrease water temperature.
8 Soil Level Touch to select the level of soil in your load.
9 Spin Speed Touch to increase or decrease washer spin speed.
!0 Water Level Touch to select the water level for your wash.
If Auto is selected your wash will automatically select the most
efficient water leave for the load.
!1 Options Touch to select Eco Rinse, Soak or Stain Treatment.
!2 Lid Lock Illuminates to indicate the lid of the washer is locked.
To open the washer pause the cycle.
!3 START/PAUSE
Touch to start or pause the selected wash cycle.
5
321
!36 7 8 9
!0 !1
!2
4