Installation Guide

24
WASH OPTIONS
Wash Temp
FabricSmart™ washer offers 5 wash temperatures, and an additional setting, ‘Controlled Cold’.
The wash temperature selected is used in the detergent activating wash (except for
the
SPORTS cycle – refer to the ‘Eco Active™ wash’ section). If Eco Active™ is‘On’ the
temperature will be colder for the second part of the wash. When Eco Active™ ‘Off’ is
selected, the bowl will fill with the wash temperature selected.
Note: the ‘Allergy’ cycle fills the bowl with water at the temperature selected. There is no
Eco Active™ phase in the wash cycle.
The temperature of cold tap water varies widely depending on your location and the
season. We have developed ‘Controlled Cold’, which adds a small amount of warm water,
when necessary, to raise your cold water wash to 20°C for a more effective wash (refer to
the ‘Changing pre-set options’ section for details on how to set ‘Controlled Cold’ as the
default temperature for your cold water wash).
Soil Level
Your clothes and other washable items sometimes need more or less cleaning than others.
The
SOIL LEVEL option lets you adjust the wash to suit the amount of soil in your load. For
example, for dirty clothes, select HEAVY and for items that are only lightly soiled, select
LIGHT. This adjusts the wash time accordingly to give the load the right amount of agitation
in order to remove the soil.
Spin Speed
Your washer offers 3 spin speeds: 1100 rpm, 700 rpm and 300 rpm, plus an additional
NO SPIN option. Simply increase or decrease your spin speed by touching the
SPIN SPEED button.
Some spin speeds are not available on some cycles for best clothes care
(eg
DELICATE cycle).
Use the
NO SPIN option to:
z
Remove drip dry garments from a mixed load before the wash goes into ‘Spin’.
z
Minimise the clothes creasing when they are left to sit in the bottom of the bowl at the
end of the cycle.
When you have selected
NO SPIN, the cycle
will end after the rinse allowing you to
remove drip dry items before you spin the
remaining items. Once drip dry items have
been removed, touch , select the SPIN
cycle (change the spin speed if necessary,
eg select 300 for delicate or creasable items)
and touch .
1
Your washer will optimise the spin speed
according to the level of out of balance in
the load.