Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Installation instructions
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Eco Active™ wash
- Wash preparation
- Getting started quickly
- Wash options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
25
WASH OPTIONS
Options
Note: in some instances it is possible to select multiple options on one cycle.
Stain Treatment
If you have stains in your wash load you can add a number of short soaks to the wash to
help remove these by selecting the
STAIN TREATMENT option.
Soak
The
SOAK option provides a two hour soak during the middle of the wash phase of the
cycle. The washer will then complete the rest of the cycle. During SOAK, the washer will
agitate for a few seconds every minute.
Select
SOAK from the OPTIONS menu.
Note: If the
SOAK option is selected on
a QUICK cycle, the soak time will be one
hour only.
To exit
SOAK early, touch and turn the
dial to select RINSE. Change the SPIN SPEED if
necessary (eg select 300 if washing delicate
or creasable items) and touch .
1
2
Ensure items are colourfast before using soak.
DO NOT use your washer to soak items in bleach or sanitiser and if you’ve soaked items in
a bucket, do not tip the contents of the bucket into your washer. The chemicals in these
products are very corrosive to metal surfaces and can damage your washer. Rinse and
wring items out thoroughly before placing them in your washer.