Installation Guide

26
WASH OPTIONS
Clothes care safeguards
To avoid accidentally damaging your clothes there are a few options that your washer will
not accept. For example, you cannot select a
HOT wash on the DELICATE, BULKY, EASY IRON
or WOOL cycles.
Delay Start
The
DELAY START option can delay the start of the wash cycle between 5 minutes and
18hours. This can be useful to time your washing to finish when you arrive home from work,
or to start once you have finished in the shower.
Touch the
MORE button to increase the
delay time, and LESS button to decrease
the time, or turn DELAY START off.
Touch
to confirm your selection and start
the countdown. The display screen will show
the time until the cycle is set to begin.
1
2
Avoid using DELAY START for damp, non-colourfast items as this may cause dye run
to occur.
Eco Rinse
Use the
ECO RINSE option to save water. The ECO RINSE option uses a spray rinse which
has been specially designed to use at least 25% less water than a traditional rinse. Use this
option when you want to use less detergent and less water. However, if you have low water
pressure or sensitive skin it is better to use a traditional rinse.
The
ECO RINSE option has not been designed to be used with fabric softener, as it does not
have a deep rinse to dispense the softener correctly. Fabric softener should not be used if
this option is selected.
ECO RINSE is available on selected cycles only. If you try to select this option on other cycles
your washer will skip over the option. The wash cycle will take slightly longer when the ECO
RINSE
option is selected.
There are some wash loads that may not suit being washed using the
ECO RINSE option. For
instance, loads that have a lot of sand or sawdust in them or garments where the colour still
runs from them.