Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Installation instructions
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Eco Active™ wash
- Wash preparation
- Getting started quickly
- Wash options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
30
CHANGING PRE-SET OPTIONS
Option Adjustment mode
After using your washer a number of times
you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options, which
can be changed:
1 The wash temperatures, including
changing the
COLD wash temperature to
CONTROLLEDCOLD.
2 The out of balance recovery routine.
3 The number of beeps at the end of
the cycle.
4 Resetting to factory default settings.
To change or reset any of the options, repeat the above steps.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Turn the washer on at the wall but do
not touch .
Touch and hold the
and together
for 3seconds. You will hear 3quick
beeps indicating you have entered
Option Adjustment mode. The washer
will show the default setting for the COLD
wash temperature.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Use the dial and buttons on the control panel
to make your changes to the pre-set options.
Touch
to return to normal mode when
you have finished modifying your options.
Your washer will automatically remember
your changes.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
To enter Option Adjustment mode
1
2
3
ICON DEFAULT
CUSTOMISED
FUNCTION
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Heavy Wash Temp
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Delicate
OOB
Recovery
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Wool EOC Beeps
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Easy Iron Factory Reset