Installation Guide

31
CHANGING PRE-SET OPTIONS
Wash temperatures
All wash temperatures can be individually adjusted if you think they are too hot or too cold.
The hot temperature will be the same as the hot water supply temperature.
To modify the wash temperature:
Adjusting your options
1
1
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Enter the Option Adjustment mode.
(refer to the OPTION ADJUSTMENT MODE
for instructions)
The diagram shows how the wash cycle icons
relate to the pre-set options you can change.
It also shows what will be displayed when
you first enter Option Adjustment mode.
Options you can change are accessible using
the
HEAVY, DELICATE, WOOL and EASY IRON
cycles only.
Enter the Option Adjustment mode.
(refer to the
OPTION ADJUSTMENT MODE for
instructions)
Select the
HEAVY cycle.
2
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Use the DELAY START, MORE button on the
panel to scroll through the available settings
of your selected option, eg to increase or
decrease the temperature of your warm wash
temperature, or to change the number of
beeps at the end of the cycle.