Installation Guide

32
CHANGING PRE-SET OPTIONS
Controlled Cold
If your incoming cold water temperature is very low you will get a less effective wash. The
CONTROLLED COLD option solves this problem by adding a small amount of hot water to
raise the temperature of the wash to approximately 20°C.
To programme the Controlled Cold temperature option:
2
Select the wash temperature you want to
adjust, eg WARM, by touching the
WASH TEMP button. The digital display
screen shows the current setting.
3
Touch the MORE or LESS button
to increase or decrease to the desired
temperature. Each increment is equal to
approximately 1°C.
1
Enter the Option Adjustment mode
(refer to the OPTION ADJUSTMENT MODE
for instructions).
Select the
HEAVY cycle.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps