Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Installation instructions
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Eco Active™ wash
- Wash preparation
- Getting started quickly
- Wash options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
33
CHANGING PRE-SET OPTIONS
2
Select COLD wash temperature by
touching the WASH TEMP button (if not
already selected).
3
The digital display shows the temperature
adjustment possible. The default setting is
, ie the temperature of the incoming
water from the supply for cold water.
4
Touch the MORE button until is
displayed. Your washer will now control the
cold temperature to approximately 20°C.
Note: each of the remaining settings equals
an approximate 1°C temperature increase or
decrease from this point.
If you always use COLD or CONTROLLED COLD water, we recommend that a WARM or HOT
wash be used regularly, eg every 5th wash should be at least a warm one to maintain the
cleanliness of your washer.
Touch
to save the setting (if you wish to
make no other changes).