Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Installation instructions
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Eco Active™ wash
- Wash preparation
- Getting started quickly
- Wash options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
38
CARING FOR YOUR WASHER
Products that might damage your washer
z
Concentrated bleaches, laundry pre-soakers/sanitisers, stain removers and hydrocarbon
solvents (eg petrol and paint thinners) can cause damage to the surfaces eg control
panel, and components of your washer.
z
Be careful when washing garments stained with solvents as they are flammable. Do not
put them in your dryer.
z
Use of dyes in your washer may cause staining of the plastic components. The dye will
not damage the washer but we suggest you thoroughly clean your washer afterwards.
We do not recommend the use of dye strippers in your washer.
Automatic lint system
Your washer has a self-cleaning lint system. The washer automatically separates the lint
from the wash water, traps the lint between the inner and outer bowls and flushes it out at
the end of the wash.
Washer sounds and beeps
z
Your washer may make sounds that you will not have heard from other clothes washers.
z
While draining, your washer may give several low thuds. Your washer is checking that the
water has drained before spinning.
z
Your washer will beep if you have used NO SPIN and at the end of the cycle.
z
If your washer is beeping continuously or giving a musical series of beeps, refer to the
‘Before you call for service’ section.
2
Touch to turn your machine on and select
the BOWL CLEAN cycle.
Touch
to start the cycle, refer to the
‘Wash cycles’ for cycle details.
NEED
IMAGE
NEED
IMAGE
3