WARMING DRAWER MINIMAL WB24SDEB2 & WB30SDEB1 CONTEMPORARY WB24SDEX2 & WB30SDEX1 PROFESSIONAL WB30SPEX1 INSTALLATION GUIDE US CA
CONTENTS Safety and warnings 4 Warming drawer models 5 Unpack your product 6 Parts supplied 7 Tools required 7 Product dimensions - 24" minimal & contemporary models 8 Product dimensions - 30" minimal & contemporary models 9 Product dimensions - 30" professional models Cabinetry dimensions - 24" minimal & contemporary models 10 11 Cabinetry dimensions - 30" minimal & contemporary models 12 Cabinetry dimensions - 30” professional models 13 Installation options 14 Installing the drawer
SAFETY AND WARNINGS ! WARNING! Tip Hazard This product may tip. Keep children away and take care. Failure to follow this advice may result in injury. • Drawer must be secured in place by supplied screws. • Ensure there is a fixed shelf directly above the drawer if it is not installed under another product. ! WARNING! Cut Hazard Failure to use caution could result in injury. • Take care: some edges may be sharp. • Do not put fingers in the drawer when closing.
SAFETY AND WARNINGS WARMING DRAWER MODELS READ AND SAVE THIS GUIDE WARNING! To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety guides listed below. Read all the instructions before using the appliance. Installation z z z z z z z z Please make this information available to the person installing the product.
UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS Remove the warming drawer and accessories box from the packaging. Recycle the materials that can be reused. Dispose packaging materials in accordance with local regulations on waste disposal. Inspect the warming drawer for any signs of damage. Do not install the warming drawer if it has been damaged. If the product is damaged, contact your local Fisher & Paykel dealer.
PARTS SUPPLIED TOOLS REQUIRED WARMING DRAWER MINIMAL WB24SDEB & WB30SDEB WARMING DRAWER CONTEMPORARY WB24SDEX & WB30SDEX PROFESSIONAL WB30SPEX iNTEGRATED WB30SDEI MINIMAL WB24SDEB & WB30SDEB CONTEMPORARY WB24SDEX & WB30SDEX SERVICE & WARRANTY PROFESSIONAL WB30SPEX SERVICE ET GARANTIE ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ SERVIZIO E GARANZIA SERVICE & GARANTIE HUOLTO JA TAKUU SERVICE OG GARANTI 保修和维修 USER GUIDE 服務和保修 US CA INSTALLATION GUIDE US CA Service & Warranty User guide T20 star head countersunk screw 4
PRODUCT DIMENSIONS - 24" MINIMAL & CONTEMPORARY MODELS E PRODUCT DIMENSIONS IN MM 5 1/2 140 B Overall width 23 7/16 596 C Overall depth* 22 5/16 567 D Height of chassis 5 1/2 140 E Width of chassis 21 3/8 543 21 9/16 547 G Height of drawer front panel 5 3/8 136 H Depth of drawer front panel and attachment flange 13/16 20 16 5/16 414 1/16 2 A Overall height C h F Depth of chassis** i ISOMETRIC I Depth of open drawer J Height from bottom of chassis to bottom of drawer front
PRODUCT DIMENSIONS - 30" MINIMAL & CONTEMPORARY MODELS E PRODUCT DIMENSIONS c h IN MM A Overall height 10 11/16 271 B Overall width 29 15/16 761 C Overall depth* 22 5/16 567 D Height of chassis 10 11/16 271 E Width of chassis 27 13/16 707 21 9/16 547 10 1/2 267 H Depth of drawer front panel and attachment flange 13/16 20 I Depth of open drawer 16 1/2 419 1/16 2 F Depth of chassis** G Height of drawer front panel i ISOMETRIC J Height from bottom of chassis to bottom of dra
PRODUCT DIMENSIONS - 30" PROFESSIONAL MODELS e PRODUCT DIMENSIONS c IN MM A Overall height 10 11/16 271 B Overall width 29 15/16 761 22 3/8 568 D Height of chassis 10 11/16 271 E Width of chassis 27 3/4 704 F Depth of chassis** 21 9/16 548 10 1/2 267 H Depth of drawer front panel and attachment flange 13/16 20 I Depth of open drawer 16 1/2 419 1/16 2 K Width of handle 29 736 L Depth of handle 2 1/4 58 C Overall depth* h G Height of drawer front panel i ISOMETRIC J H
CABINETRY DIMENSIONS - 24" MINIMAL & CONTEMPORARY MODELS d FLUSH INSTALL b PO* e a PO* c PROFILE 13/16 (20mm)* f PLAN CABINETRY DIMENSIONS WB24SD INCHES MM A Minimum inside height of cavity 5 9/16 142 B Minimum inside width of cavity 22 1/16 560 C Minimum inside depth of cavity 22 1/2 572 D Overall width of cabinetry 23 5/8 600 1/8 3 1/16 2 E Minimum clearance between top of front panel and upper cabinetry panel F Minimum clearance between bottom of front panel and lower cabine
CABINETRY DIMENSIONS - 30" MINIMAL & CONTEMPORARY MODELS FLUSH INSTALL d b PO* e PO* 13/16 (20mm)* c a f PROFILE CABINETRY DIMENSIONS PLAN WB30SD INCHES MM A Minimum inside height of cavity 10 3/4 273 B Minimum inside width of cavity 28 1/2 724 C Minimum inside depth of cavity 22 1/2 572 D Overall width of cabinetry 30 762 E Minimum clearance between top of front panel and upper cabinetry panel 1/8 3 1/16 2 F Minimum clearance between bottom of front panel and lower cabinetry pan
CABINETRY DIMENSIONS - 30” PROFESSIONAL MODELS d b FLUSH INSTALL PO* e PO* c 13/16 (20mm)* a f PROFILE CABINETRY DIMENSIONS PLAN WB30SP INCHES MM A Minimum inside height of cavity 10 3/4 273 B Minimum inside width of cavity 28 3/8 720 C Minimum inside depth of cavity 22 1/2 572 D Overall width of cabinetry 30 762 E Minimum clearance between top of front panel and upper cabinetry panel 1/8 3 1/16 2 F Minimum clearance between bottom of front panel and lower cabinetry panel PROUD
INSTALLATION OPTIONS STANDALONE INSTALLATION COMBINED WITH SINGLE OVEN This installation is suitable for Minimal, Contemporary & Professional Warming drawers. A fixed shelf must be provided above the warming drawer. This combination is suitable for 24" and 30" Warming drawers that can fully support 24" and 30" Fisher & Paykel wall ovens, respectively.
INSTALLATION OPTIONS COMBINED WITH COMPANION PRODUCT COMBINED WITH DOUBLE OVEN This combination is suitable for 24" and 30" Warming drawers that can fully support 24" and 30" Fisher & Paykel companion products, respectively. This combination is suitable for 30" Warming drawers that can fully support a 30" Fisher & Paykel double oven.
INSTALLATION OPTIONS INSTALLING THE DRAWER COMBINED WITH SINGLE OVEN & COMPANION PRODUCT This combination is suitable for Minimal, Contemporary & Professional Warming drawers. The 30" model can fully support both 30" Fisher & Paykel single oven and companion product. A shelf is required above the oven to support the companion product. Ensure the bottom shelf can fully support the weight of all appliances. Connect the power plug into the power outlet.
ADJUSTING THE DEPTH The depth of the front panel of the warming drawer can be adjusted to align with the surrounding cabinetry. 1 ADJUSTING THE HEIGHT The front panel of the warming drawer can be adjusted vertically to align with the surrounding cabinetry. Open the drawer fully. Using a hex key, turn the adjustment screw to move the front panel forward. Turn clockwise to move backwards or counterclockwise to move forwards. 1 Open the drawer fully, and slightly loosen the screws.
INSTALLER CHECKLIST IMPORTANT! FP WARMER DRAWER INTERFACE LOGIC_V1 USER PRESSES ON/OFF BUTTON 1h Read all installation instructions in this manual to see if the unit has been correctly installed. Ensure that installation has been completed correctly before use.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.