COMPANION PRODUCTS Warming Drawer WB24 Coffee Maker EB24 Steam Oven OS24N models INSTALLATION GUIDE US CA 591496B 07.
CONTENTS Warming drawer 1 Coffee maker 13 Steam oven 21 1 Safety and warnings 2 1 Safety and warnings 14 1 Safety and warnings 22 2 Parts supplied 3 2 Parts supplied 15 2 Prior to installation 23 3 Prior to installation 3 3 Prior to installation 15 3 After installation 23 4 Product dimensions 4 4 After installation 15 4 Product dimensions 24 5 Product dimensions 16 5A Cabinetry dimensions (18 1/8” (460mm) high cavity) 25 5B Cabinetry dimensions (18 7/8” (480mm)
WARMING DRAWER WB24 models
2 Screws (4) Anti-tip bracket (1) Oven support brackets (2) 3 ● ● ● ● ● ● The The The The The You PARTS SUPPLIED PRIOR TO INSTALLATION cavity is square and level, and of the required dimensions. installation will comply with all clearance requirements and applicable standards and regulations. power switch will be easily accessible to the customer when the warming drawer is installed. warming drawer (and any product on top of it) will rest on a surface that can support its weight.
COFFEE MAKER EB24 models
5 PRODUCT DIMENSIONS E H C F D SIDE TOP B I EB24 MODELS PRODUCT DIMENSIONS A Overall height of product A FRONT inches (mm) 18” (458) B Overall width of product 23 1/2” (596) C 18 7/8” (480) Overall depth of product (excluding dials) D Height of chassis 17 1/2” (445) E Width of chassis 22 1/16” (560) F Depth of chassis 18 1/8” (460) G Depth of coffee maker frame and control panel H Stepdown control panel to chassis I Height of control panel 13/16” (20) 1/2” (13) 4” (100) COFFEE M
8 FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Make sure the coffee maker is level and securely fitted to the cabinetry. Check the lower trim is undamaged. Check there is adequate clearance. This is to ensure correct air circulation. Make sure any cable ties and internal packaging has been removed from the coffee maker cavity. Make sure all coffee maker vents and openings are clear and free of any obstruction or damage.
STEAM OVEN OS24N models
8 FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Make sure the oven is level and securely fitted to the cabinetry. Check the lower trim is undamaged. Open the oven door slowly until it is fully open and check there is adequate clearance between the bottom of the door and the lower trim. This is to ensure correct air circulation. Should the lower trim become damaged, straighten the trim and ensure the oven door opens fully without obstruction.
PRODUITS COMPAGNONS Modèles Tiroir chauffant WB24 Machine à café EB24 Four à vapeur OS24N GUIDE D’INSTALLATION CA 591496B 07.
CONTENTS Tiroir chauffant 1 Machine à café 13 Four à vapeur 21 1 Sécurité et avertissements 2 1 Sécurité et avertissements 14 1 Sécurité et avertissements 22 2 Pièces fournies 3 2 Pièces fournies 15 2 Avant l’installation 23 3 Avant l’installation 3 3 Avant l’installation 15 3 Après l’installation 23 4 Dimensions du produit 4 4 Après l’installation 15 4 Dimensions du Produit 24 5 Dimensions du produit 16 5A Dimensions de l’armoire (cavité de 18 1/8” (460mm) de ha
TIROIR CHAUFFANT Modèles WB24
2 Des vis (4) Support anti-basculement (1) Supports de support de four (2) 3 ● ● ● ● ● ● PIÈCES FOURNIES AVANT L’INSTALLATION La cavité est carrée et de niveau, et des dimensions requises. L’installation sera conforme à toutes les exigences de dégagement et aux normes et règlements applicables. L’interrupteur d’alimentation sera facilement accessible au client lorsque le tiroir-réchaud est installé.
MACHINE À CAFÉ Modèles EB24
5 DIMENSIONS DU PRODUIT E H C F D LE CÔTÉ HAUT B I MODÈLES EB24 DIMENSIONS DU PRODUIT A Hauteur totale du produit A 23 1/2” (596) C 18 7/8” (480) Profondeur totale du produit (à l’exclusion des cadrans) D Hauteur du châssis 17 1/2” (445) E Largeur du châssis 22 1/16” (560) G Profondeur du cadre de la cafetière et du panneau de commande H Panneau de contrôle Stepdown au châssis I Hauteur du panneau de contrôle 16 | COFFEE MAKER INSTALLATION GUIDE 18” (458) B Largeur totale du produi
8 LISTE DE CONTRÔLE FINALE A REMPLIR PAR L’INSTALLATEUR Assurez-vous que la cafetière est de niveau et solidement fixée aux armoires. Vérifiez que la garniture inférieure n’est pas endommagée. Vérifiez qu’il y a un dégagement suffisant. Ceci afin d’assurer une circulation d’air correcte. Assurez-vous que les attaches de câble et l’emballage interne ont été retirés de la cavité de la cafetière.
FOUR À VAPEUR Modèles OS24N
8 LISTE DE CONTRÔLE FINALE A REMPLIR PAR L’INSTALLATEUR Assurez-vous que le four est de niveau et solidement fixé aux armoires. Vérifiez que la garniture inférieure n’est pas endommagée. Ouvrez lentement la porte du four jusqu’à ce qu’elle soit complètement ouverte et vérifiez qu’il y a un espace suffisant entre le bas de la porte et la garniture inférieure. Ceci afin d’assurer une circulation d’air correcte.