WARMING DRAWER INTEGRATED WB30SDEI INSTALLATION GUIDE US CA
CONTENTS Safety and warnings 5 Warming drawer models 6 Unpack your product 7 Electrical specifications 7 Parts supplied 8 Tools required 8 Product dimensions - 30" integrated models 9 Cabinetry dimensions - 30" integrated models Front panel specifications Installation options 10 11 11 Installing the drawer 14 Adjusting the depth 16 Adjusting the height 16 Installer checklist 17 3
SAFETY AND WARNINGS ! WARNING! Tip Hazard This product may tip. Keep children away and take care. Failure to follow this advice may result in injury. • Drawer must be secured in place by supplied screws. • Ensure there is a fixed shelf directly above the drawer if it is not installed under another product. ! WARNING! Cut Hazard Failure to use caution could result in injury. • Take care: some edges may be sharp.
SAFETY AND WARNINGS WARMING DRAWER MODELS READ AND SAVE THIS GUIDE WARNING! To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety guides listed below. Read all the instructions before using the appliance. Installation z z z z z z z z Please make this information available to the person installing the product.
UNPACK YOUR PRODUCT ELECTRICAL SPECIFICATIONS Remove the warming drawer and accessories box from the packaging. Recycle the materials that can be reused. Dispose packaging materials in accordance with local regulations on waste disposal. Inspect the warming drawer for any signs of damage. Do not install the warming drawer if it has been damaged. If the product is damaged, contact your local Fisher & Paykel dealer.
PARTS SUPPLIED TOOLS REQUIRED WARMING DRAWER MINIMAL WB24SDEB2 & WB30SDEB1 WARMING DRAWER CONTEMPORARY WB24SDEX2 & WB30SDEX1 PROFESSIONAL WB30SPEX1 INTEGRATED WB30SDEI1 INTEGRATED W30SDEI SERVICE & WARRANTY SERVICE ET GARANTIE ΣΈΡΒΙΣ ΚΑΙ ΕΓΓΎΗΣΗ SERVIZIO E GARANZIA SERVICE & GARANTIE HUOLTO JA TAKUU SERVICE OG GARANTI 保修和维修 USER GUIDE 服務和保修 US CA INSTALLATION GUIDE US CA Service & Warranty (1) User guide (1) Installation guide (1) T15 star head wood screw (12) T15 star head machine screw (
PRODUCT DIMENSIONS - 30" INTEGRATED MODELS e WB30SDEI PRODUCT DIMENSIONS c h i IN MM A Overall height 10 11/16 271 B Overall width 28 7/16 723 C Overall depth* 22 3/16 564 D Height of chassis 10 11/16 271 E Width of chassis 27 13/16 707 10 1/2 267 G Depth of door frame** 11/16 17 H Depth of open drawer 16 1/2 419 F Height of door frame ** Measured from back of chassis flange to front of door frame.
CABINETRY DIMENSIONS - 30" INTEGRATED MODELS d b PO* FLUSH INSTALL e PO* a c f custom panel PROFILE CABINETRY DIMENSIONS WB30SDEI INCHES MM 10 3/4 273 B Minimum inside width of cavity min 28 9/16 - max 28 3/4 min 725 - max 730 C Minimum inside depth of cavity 22 1/2 572 D Overall width of cabinetry 30 762 E Minimum clearance between top of door frame and upper cabinetry panel 1/8 3 1/16 2 A Minimum inside height of cavity F Minimum clearance between bottom of door frame and lowe
FRONT PANEL SPECIFICATIONS INSTALLATION OPTIONS Ensure the back and sides of the panel and cabinetry around the drawer are completely sealed with a waterproof vapour barrier (ie polyurethane) to prevent damage to the panel. STANDALONE INSTALLATION This installation is suitable for Minimal, Contemporary & Professional Warming drawers. A fixed shelf must be installed above the warming drawer.
INSTALLATION OPTIONS COMBINED WITH SINGLE OVEN COMBINED WITH COMPANION PRODUCT This combination is suitable for 24" and 30" Warming Drawers that can fully support 24" and 30" Fisher & Paykel wall ovens, respectively. This combination is suitable for 24" and 30" Warming Drawers that can fully support 24" and 30" Fisher & Paykel companion products, respectively.
INSTALLATION OPTIONS COMBINED WITH DOUBLE OVEN COMBINED WITH SINGLE OVEN & COMPANION PRODUCT This combination is suitable for 30" Warming Drawers that can fully support a 30" Fisher & Paykel double oven. This combination is suitable for 30" Warming Drawers. A shelf is required above the oven to support the 30" companion product. Ensure the bottom shelf can fully support the weight of all appliances.
INSTALLING THE DRAWER cabinet bracket 1 chassis flange Check the base of the cabinetry using a leveler or ruler. bracket cover Ensure the cabinetry is square and base is level. 4 Secure the bracket cover and chassis flange to the cabinet brackets with T15 machine screws (6x). spacer 2 Use the supplied spacer to locate the attachment position of the cabinet brackets to correct depth. Secure the cabinet brackets to the side panels of the cabinetry with T15 wood screws (6x).
INSTALLING THE DRAWER Ensure the custom panel is correctly aligned and centered before fixing to the tape as this can only be done once. 6 Drill pilot holes into the custom panel through the screw holes in the door frame. 8 Be careful not to drill through the panel. Secure the custom panel to the door frame with T15 wood screws (6x). Use shims (not supplied) to ensure gaps are accurate. shims 7 Open the drawer fully, and remove the T15 screws from both sides of the door frame.
ADJUSTING THE DEPTH The depth of the front panel of the warming drawer can be adjusted to align with the surrounding cabinetry. 1 ADJUSTING THE HEIGHT The front panel of the warming drawer can be adjusted vertically to align with the surrounding cabinetry. Open the drawer fully. Using a hex key, turn the adjustment screw to move the front panel forward. Turn clockwise to move backwards or counterclockwise to move forwards. Open the drawer fully, and slightly loosen the T15 screws.
INSTALLER CHECKLIST FP WARMER DRAWER INTERFACE LOGIC_V1 IMPORTANT! USER PRESSES ON/OFF BUTTON 1h Read all installation instructions in this manual to see if the unit has been correctly installed. Ensure that installation has been completed correctly before use. Ensure that: PRODUCT OFF 1h Test operation: 2h 2h PRODUCT OFF 1h 2h USER PRESSES ON/OFF BUTTON F the warming drawer is level and securely fitted to the cabinetry. F 1h Open the drawer.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
