Installation Guide
Table Of Contents
- Contents
- Safety and warnings
- Warming drawer models
- Unpack your product
- Electrical specifications
- Parts supplied
- Tools required
- Product dimensions - 30" integrated models
- Cabinetry dimensions - 30" integrated models
- Front panel specifications
- Installation options
- Installing the drawer
- Adjusting the depth
- Adjusting the height
- Installer checklist
16
ADJUSTING THE DEPTH ADJUSTING THE HEIGHT
Open the drawer fully.
Using a hex key, turn the adjustment
screw to move the front panel forward.
Turn clockwise to move backwards or
counterclockwise to move forwards.
1
2
The depth is adjustable within 4mm.
The depth of the front panel of the warming drawer can be adjusted to align with the
surrounding cabinetry.
Open the drawer fully, and slightly
loosen the T15 screws.
1
2
3
Adjust to the required height and then
re-tighten the screws. The height is
adjustable within 2mm.
Close the drawer and check the
alignment. Adjust again if necessary.
The front panel of the warming drawer can be adjusted vertically to align with the surrounding
cabinetry.
max 2mm