Installation Guide
Table Of Contents
- Table des matières
- Safety and warnings
- Warming drawer models
- Unpack your product
- Parts supplied
- Tools required
- Product dimensions - 24" minimal & contemporary models
- Product dimensions - 30" minimal & contemporary models
- Product dimensions - 30" professional models
- Cabinetry dimensions - 24" minimal & contemporary models
- Cabinetry dimensions - 30" minimal & contemporary models
- Cabinetry dimensions - 30” professional models
- Installation options
- Installing the drawer
- Adjusting the depth
- Adjusting the height
- Installer checklist
18
F le tiroir chauffe-plat est de niveau et fixé solidement aux armoires
F tout emballage interne a été retiré du tiroir
F le client peut accéder à l’interrupteur de sectionnement
F la tablette inférieure peut soutenir entièrement le poids total des appareils
combinés
F Ouvrez le tiroir.
F Appuyez sur la touche
1h
2h
1h
2h
1h
2h
1h
2h
FP WARMER DRAWER INTERFACE LOGIC_V1
PRODUCT OFF
THE THREE TEMPERATURE BUTTONS WORK AS A UNIT
ONLY ONE CAN BE SELECTED AND SHOW RED AT A TIME,
THE OTHER TWO BUTTONS SHOW WHITE
THE TWO TIMER BUTTONS WORK AS A UNIT
ONLY ONE CAN BE SELECTED AND SHOW RED AT A TIME,
THE OTHER BUTTON SHOWS WHITE
ICE AND WATER INTERFACE COMPONENTS
All bezels capable of glowing white and red
except fot the on /o bezel which only needs
to glow red.
Component Layout As Shown.
USER PRESSES ON/OFF BUTTON
ALL OTHER BEZELS GLOW WHITE EXCEPT
TEMPERATURE SETTING WHICH IS PRESET TO
MEDIUM AND GLOWS RED (PRODUCT STARTS
HEATING TO THE MEDIUM TEMPERATURE)
ON/OFF GLOWS RED UNTIL BUTTON IS PRESSED
AGAIN SHUTTING THE PRODUCT OFF.
WHEN THE TIMER BUTTON IS PRESSED THE
PRODUCT IS SET TO RUN FOR THE ALLOWED
TIME.
WHEN THIS TIME RUNS OUT THE PRODUCT SHUTS
OFF.
1h
2h
1h
2h
pour mettre en marche le tiroir chauffe-plat.
F Fermez le tiroir.
F Après 5-10 minutes, ouvrez le tiroir pour vérifier que les surfaces internes du tiroir
sont légèrement chaudes.
F Appuyez sur la touche
1h
2h
1h
2h
1h
2h
1h
2h
FP WARMER DRAWER INTERFACE LOGIC_V1
PRODUCT OFF
THE THREE TEMPERATURE BUTTONS WORK AS A UNIT
ONLY ONE CAN BE SELECTED AND SHOW RED AT A TIME,
THE OTHER TWO BUTTONS SHOW WHITE
THE TWO TIMER BUTTONS WORK AS A UNIT
ONLY ONE CAN BE SELECTED AND SHOW RED AT A TIME,
THE OTHER BUTTON SHOWS WHITE
ICE AND WATER INTERFACE COMPONENTS
All bezels capable of glowing white and red
except fot the on /o bezel which only needs
to glow red.
Component Layout As Shown.
USER PRESSES ON/OFF BUTTON
ALL OTHER BEZELS GLOW WHITE EXCEPT
TEMPERATURE SETTING WHICH IS PRESET TO
MEDIUM AND GLOWS RED (PRODUCT STARTS
HEATING TO THE MEDIUM TEMPERATURE)
ON/OFF GLOWS RED UNTIL BUTTON IS PRESSED
AGAIN SHUTTING THE PRODUCT OFF.
WHEN THE TIMER BUTTON IS PRESSED THE
PRODUCT IS SET TO RUN FOR THE ALLOWED
TIME.
WHEN THIS TIME RUNS OUT THE PRODUCT SHUTS
OFF.
1h
2h
1h
2h
pour éteindre le tiroir chauffe-plat et fermez le tiroir.
Remplir et conserver pour référence ultérieure :
Modèle
N° de série
Date d’achat
Acheteur
Adresse du détaillant
Nom de l’installateur
Signature de l’installateur
Entreprise d’installation
Date de l’installation
LISTE DE VÉRIFICATION DE L’INSTALLATEUR
IMPORTANT!
Lisez toutes les instructions d’installation de ce manuel pour vérifier que l’appareil est
correctement installé. Assurez-vous que l’installation est correctement effectuée avant d’utiliser
l’appareil.
Assurez-vous que : Faites un essai :