User Manual

18
GETTING STARTED QUICKLY
1
Sort your wash load carefully.
Separate white/light colours from dark colours.
Wash new, highly coloured and dark coloured items separately to prevent dye transfer.
Refer to ‘Sorting your load’ (page 20).
2
Load your clothes individually into the wash drum. Close the door.
Refer to ‘Door lock’ (page 14) for correct locking and unlocking of thedoor.
3
Press ‘POWER’ to activate your washer.
4
Select your wash cycle by turning the SmartTouch™ Control Dial.
Refer to ‘Wash cycles’ (page 19) for more details on options that suit your
launderingneeds.
5
If you wish to adjust the default settings of the wash cycle, refer to ‘Customising wash
cycle’ (page 23).
6
Once the wash cycle is selected, the screen displays ‘Time to go’, indicating that wash
isready to start.
If you prefer to start the wash cycle at a later time, set a delay for the start time
ofyour washer. Refer to ‘Delay start’ (page 23) for more information.
7
Fill the liquid/powdered detergent and fabric softener in their respective compartments.
Referto‘Adding detergent’ (page 21) and ‘Adding fabric softener’ (page 22) for
more information on the amount of detergent/softener to use.
8
Once ready, press to start the cycle.
If you make an invalid selection, the washer will beep to alert you.
When the cycle finishes, your washer will perform end of cycle beeps and then
turnoffautomatically.
If you wish to stop your washer at any point during a cycle, simply touch
topausethe cycle. There may be a slight delay while the drum comes to a stop,
thenthe door will unlock. Under certain conditions however the door will remain
locked for safety reasons. Refer to ‘Safety features’ (page 14).
If you wish to cancel or change the wash cycle once a cycle has started, simply
touchthe button then select the new cycle. Touch to restart the washer.
IMPORTANT!
For the best fabric and colour care, remove your clothes as soon as the cycle is complete.
Failure to follow the instructions in this guide can result in damage to your garments
and wash performance may not be met.