User Manual

23
CUSTOMISING WASH CYCLE
Delay start
The ‘Delay Start’ option enables you to delay the start of the wash cycle from between
5minutes and 12hours. Times you can select are 5min, 15min, 30min, 1hour, then hourly
up to 12hours. This can be useful to time your washing to finish when you arrive home
from work, or to start once you have finished in the shower. Some stain removers also
require you to spray them on then leave for several minutes, before washing. Your washer
will wait for the selected time then start the cycle without any other inputs from you.
To programme a ‘Delay Start’ time:
1
Touch the ‘More’ button to increase the delay time. The delay time will increase
from 15minutes up to 12hours.
– If you hold the ‘More’ button down, the time displayed on the screen will increase
after every half second (more convenient than touching the button repetitively).
2
Touch the ‘Less’ button to decrease the time or turn ‘Delay Start’ off.
Once started, the time will count down on the display screen in 1 minute increments.
The ‘Delay Start’ light will flash and the light will stop flashing and be on constantly.
To cancel ‘Delay Start’ time:
If you want to remove ‘Delay Start’ after the countdown has begun,
1
Touch to pause the countdown.
2
Touch ‘Less’ button to reduce the time to zero.
3
Touch again to start the cycle immediately.
Wash Temp
Your washer offers five wash temperatures:
Cold 30°C 40°C 60°C 90°C

Touch the ‘Wash Temp’ button to increase or decrease the wash temperature.
– The washer will fill with both hot and cold water (if possible) to achieve
the selectedwash temperature.
– If required, ie for cold supply or cold connection only,thewasher will
heat the water to the selected temperature.
– Some temperatures are not available on some cycles as a safeguard for
your clothes(eg60°C or 90°C on the ‘Delicate’ cycle).
IMPORTANT!
When 90°C temperature is selected, the door glass will become hot.
Take care when touching the door. Keep children away from the washer.