User Manual
27
Cleaning the inside of your washer
It is important that you regularly clean the inside of your washer
using the ‘Drum Clean’ cycle. After 100cycles the icon will
flash every time you turn your washer on to remind you to do
this. If your washer starts to smell this is a sign that you should
complete a ‘Drum Clean’ cycle. We recommend that you do not
have any items in the washer when you run this cycle.
To clean the inside of your washer:
1
Add approximately 2scoops of a good quality powdered detergent directly into the
‘MAIN WASH Powder’ compartment of the dispenser drawer or use a drum cleaning
product specifically designed for front loading washing machines (follow manufacturer’s
instructions).
1
Press ‘POWER’ to turn your washer on and select the ‘DrumClean’ cycle.
3
Touch to start the cycle.
Cleaning the drum and the door
Use a soft damp cloth to wipe the door, cleaning any water marks or residue off it.
Wipe the rubber seal around the door. Remove any items or lint accumulating in the
bottom of the seal catchment and wipe out any water accumulated here. If this is not
cleaned out, unpleasant odours will develop.
If the drum has any residual dirt or lint stuck to it, remove this and wipe the drum clean.
Do not leave any metal objects in the drum as these may rust and cause staining.
Cleaning the hoses
Each inlet hose has a filter in it, preventing any solid contaminants in the water from
entering your washing machine. Occasionally you should disconnect the water inlet
hoses where they connect to the taps, check these for any build up of dirt and wash
the filters out.
CARING FOR YOUR WASHER
‘Drum Clean’ cycle