Installation and Operating Instructions

Wash cycle options

Keylock

This option enables you to deactivate the buttons on the display panel, except for the POWER

and KEYLOCK buttons. This prevents accidental button presses.

To turn Keylock mode ON or OFF, when the washer is powered on:



Touch and hold the KEYLOCK button for 2 seconds.

Note: when activated, the light above the KEYLOCK button is illuminated.

If Keylock mode is activated and the machine is powered off:



To turn your washer on, press the POWER button, then touch and hold the KEYLOCK button for

twoseconds. Select your wash cycle, options and then START / PAUSE to start the cycle.

Delay Start

The DELAY START option enables you to delay the start of the wash cycle from between

5minutes and 12hours. Times you can select are 5min, 15min, 30min, 1hour, then hourly up

to 12hours. This can be useful to time your washing to finish when you arrive home from work,

or to start once you have finished in the shower. Certain stain removers also require you to spray

them on then leave for several minutes, before washing. Your washer will wait for the selected

time then start without you having to wait or remember to start your machine.

To programme a DELAY START time, simply touch the MORE

button to increase the delay

time and LESS

button to decrease the time or turn DELAY START off. Touch START / PAUSE

to confirm your selection and start the countdown. Once started, the time will countdown

on the digital display panel in 1 minute increments, the DELAY START light will flash and the

START / PAUSE light will stop flashing and turn on solid.

Note: if you hold the MORE

button down, the time displayed on the screen will increase after

every half a second (more convenient than touching the button repetitively).

To remove a delay start time once it is counting down, simply touch START / PAUSE, then

touch the LESS

button to decrease the time to zero. Touch START / PAUSE to start the cycle

immediately.

Note: we suggest that you avoid using DELAY START for damp, non-colourfast items as this may

cause dye run to occur. We also recommend you use powder detergent when you use the DELAY

START function.