User Manual
14
SmartTouch™ Control Dial
The SmartTouch™ Control Dial provides easy and efficient wash cycle selection. As you
rotate the dial, the icon of the wash cycle selected will be illuminated, along with the
default settings for that cycle on the right side of the control panel.
SmartTouch™ buttons
The smooth, easy clean buttons enable easy selection of options with lights clearly showing
the selections you are making.
Digital display screen
The digital display screen provides feedback on how long the wash cycle has to go. If
you have programmed a ‘Delay Start’, the time remaining until the cycle will start will
be displayed here, along with any messages to help you with the overall running of your
washer (eg user warnings).
Time to go
Your washer displays approximately how many minutes the cycle you are running has
remaining, so that you can tell at a glance when your washing will be finished.
Please be aware that a number of factors can influence the overall cycle time, eg the water
flow rate, water pressure, whether hot water is being used from the tap or the water is
heated by the internal heater, load size, cycle and option selections. Therefore cycle times
will vary. Unexpected events in a wash cycle (eg out of balance, oversudsing) can lengthen
the cycle time.
Progress lights
The progress lights indicate what part of the cycle the washer is currently on (wash, rinse
or spin). All three lights are on at the beginning of the cycle. The light for the current part
of the cycle flashes, and each one goes out when that part of the cycle iscomplete.
Keylock mode
Keylock can be used to lock the buttons on your washer. This will avoid accidental button
pushes. For more detail please refer to ‘Wash cycle options’.
Drum light (WH8560F, WH8060F models only)
Your machine has a drum light to help assist you when loading and unloading your washing
machine. When you press ‘Power’, the LED light in the drum will turn on, after2 minutes it
will automatically turn off. At the end of the cycle, the drum light will turn on again for 5
minutes to help facilitate unloading.
CONTROL PANEL