User Manual

BEFORE YOUR FIRST WASH

Before you start, it is a good idea to go through the following checklist:

1 Have the packaging and transit bolts been removed?

2 Is the drain hose threaded through the ‘Ubend’ (with no more than 20mm extended)

and hooked into your standpipe or tub, or attached to a spigot?

3 Is the hot hose connected to the hot valve (colour-coded orange, if present)? Is the cold

hose connected to the cold valve (colour-coded white)? Have the taps been turned on?

4 Is the machine correctly levelled, feet are locked and cabinet corners clear of the

floor and walls?

5 Has the power cord been connected to an appropriate power supply and the

power turned on?

6 Have you performed the installation test cycle?

7 We recommend you complete your first cycle with a half-load amount of detergent

and without a load in order to remove any residues remaining in the machine from the

manufacturing process.