User Manual
26
GETTING STARTED QUICKLY
WH9060J, WH8560J, WH8060J and WH7560J models
z
Sort your washing carefully. Separate white/light
colours from dark colours. Wash new, highly coloured
and dark coloured items separately to prevent dye
transfer. Refer to ‘Wash preparation’.
z
Load your clothes individually into the wash drum.
Close the door.
z
Place detergent in the correct compartment in the
detergent dispenser drawer marked . Use Low
Sudsing or ‘Front Loader’ liquid or powder detergents.
Alternatively use detergent pods. Place the pod at the
back of the drum before you load in any clothing. For
more information on detergent refer to ‘Detergent and
fabric softener’.
z
Place fabric softener in the compartment marked with
a . For more information on fabric softener refer to
‘Detergent and fabric softener’.
Fabric softener must not be used if you have selected
the ‘Quick’ cycle.
1 Press ‘Power’ to activate your washer.
2 Select your wash cycle by turning the SmartTouch™
Control Dial.
3 Choose your wash options, if you wish to select
options different from the default options for thecycle.
4 Touch to start the cycle.
Detergent in
compartment marked
Fabric softener in
compartment marked
z
If you make an invalid selection the washer will beep at you.
z
When the cycle finishes, your washer will perform end of cycle beeps to alert you and
then turn off automatically.
z
If you wish to stop your washer at any point during a cycle, simply touch to pause
the cycle. There may be a slight delay while the drum comes to a stop, then the door will
unlock. Under certain conditions however the door will remain locked for safety reasons
(refer to ‘Safety features’).
z
If you wish to cancel or change the wash cycle once a cycle has started, simply touch the
button then select the new cycle. Touch to restart the washer.
z
For the best fabric and colour care, remove your clothes as soon as the
cycle has finished.
z
Failure to follow the advice in this guide may result in damage to your garments and
your expectations of wash performance may not be met.