User's Manual
Table Of Contents
- Contents
- Safety and warnings
- Installation guide
- Before your first wash
- Safety features
- Control panel
- Wash cycles
- Detergent and softener
- Where to put the detergent
- Wash preparation
- Getting started quickly
- Wash cycle options
- Customising a wash cycle
- Changing pre-set options
- Caring for your washer
- Before you call for service
- Fault codes
- Troubleshooting
- Manufacturer’s warranty
- Customer care
38
WASH CYCLE OPTIONS
Add a Garment (F/P models)
The ADD A GARMENT option enables you to add or remove items during the wash stage of
the cycle, under certain conditions.
Press the
ADD A GARMENT button.
Wait until you hear the door unlock. The
button will flash.
Open the door and add or remove items.
Close the door and press
to restart
the cycle.
1
2
Eco/Eco Rinse
Use the
ECO/ECO RINSE option to save water and energy. Selecting ECO/ECO RINSE will
reduce the wash temperature slightly and alter the wash and rinse programming.
This option will not be available if
PRE WASH or RINSE+ has been selected.
If you wish to, you can select both the
PRE WASH and RINSE+ WASH BOOST options to
perform on the same cycle. Likewise, you can select ECO/ECO RINSE and WRINKLE FREE to
perform on the same cycle. Press the appropriate button until both options are selected.
Repeat to deselect an option.