User Guide

19
THE CLEANSMART™ WASH
Some cycles can be used in both modes, whilst others are available in only one.
CYCLE HE ON HE OFF
Regular
Heavy
Handwash
Sheets –
Easy Iron –
Bulky –
Allergy
Quick –
Towels
These two wash modes mean that your CleanSmart™ washer gives you the best of both
worlds, accommodating any laundry situation.
The CleanSmart™ washer has two modes of washing,
HE ON (HIGH EFFICIENCY) and HE OFF
(CONVENTIONAL). Both modes start the same way, with a Detergent Activating wash.
Detergent Activating wash
CleanSmart™ fills the bowl at the selected water temperature,
with just enough water so the clothes are saturated. This small
amount of sudsy water flows through the clothes, up a specially
designed portal and back onto the clothes in a waterfall effect. This
thoroughly dissolves and activates the detergent.
High Efficiency On (High Efficiency mode)
In the High Efficiency mode the CleanSmart™ then fills with just
enough cool water to lift the clothes off the low-profile agitator so
that when it rotates, the clothes gently roll over each other. This
wash gives you the benefit of water savings, using similar quantities
of water to most front loaders.
High Efficiency Off (Conventional mode)
The Conventional mode is the immersion wash all top-load washer
users are familiar with. However, this mode still uses less water than
that of other top loaders which utilise the immersion wash. After
the Detergent Activating wash the CleanSmart™ fills with cold water
until the clothes are submerged, and gently turns the clothes over.
We recommend this mode when the dilution effect of water can
solve or prevent common wash problems. For example, when dye
or colour run can be a problem (ie new, dark-coloured garments),
or when washing sandy towels.